3D Print Removal Tool

/3D Print Removal Tool

3D Print Removal Tool

$5.75 (as of September 12, 2019, 2:02 pm) & FREE Shipping. Details $5.52

Usually ships in 24 hours

Rounded edge is safer and less likely to tear print bed tape.
Speeds removal of parts from print bed.
Useful to pop prints off the bed, and to scrape off stuck-on plastic.

Usually ships in 24 hours


A useful tool to go together with your 3D printer — the long, flexible blade is rounded, making it safer for kids, effective with large printed items, and minimizes damage to the printing surface.

The thin blade is a convenient feeler gauge for setting a consistent gap between the nozzle and print bed. In case you have been tramming (leveling) your heated print bed with a piece of paper, your fingers will thank you!

The thicker neck comes in handy for getting rid of rafts and for trimming off supports.

To cast off prints out of bed, work the edge of the tool under a corner of the print, approximately half way between the tip of the blade and the deal with. Next, use a sawing motion to get the tool under the remainder of the print to split it from the bed. Tilting or twisting the blade fairly will lend a hand speed up the lifting of the print. When tilting the blade, twist the deal with counter-clockwise in case you are working from the precise side of the print. (In case you are left-handed and starting from the left, twist the tool clockwise.)

If you can not get the blade under the print to begin, bring the left edge of the tool against a right-side corner of the print and twist the deal with clockwise. Repeat until the corner lifts up enough to permit the blade to begin getting under the print.

If the print is firmly stuck to the print bed, try pushing the tool in order that the deal with is closer to the print. This brings the thicker a part of the blade (closest to the deal with) under the object and acts as a wedge to lend a hand pry the part up. Wiggle the blade loose and repeat.

If the print is stuck too firmly to take away with the tool, you may also wish to fairly increase your starting nozzle elevation. The idea is to have the print stick firmly to the bed throughout printing, but still be removable with the tool.

See product’s website online for more usage information.

Rounded edge is safer and not more prone to tear print bed tape.
Speeds removal of parts from print bed.
Useful to pop prints out of bed, and to scrape off stuck-on plastic.
120-mm long flexible blade helps to succeed in underneath large prints.
An crucial addition on your 3D Printer Tool Kit.

Additional information



There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.